Home › Codes › SPN 3936 › FMI 2

SPN 3936 FMI 2

Aftertreatment 1 DPF System — Data erratic, intermittent, or incorrect.
The signal jumps around, drops in and out, or disagrees with other information the controller has.

What the SPN covers: A summary fault for the diesel particulate filter system, usually set when regenerations are not keeping soot under control. More on SPN 3936.

What FMI 2 usually points to: Loose or corroded connectors, chafed wiring, a failing sensor, or two redundant sensors that do not agree. More on FMI 2.

Severity

HIGH — limit use, diagnose now

Often comes with escalating derates. Fix the cause and regenerate before the DPF overloads.

Likely causes

  1. Regeneration requested but not completed
  2. Exhaust temperature sensor or DOC problem stopping regen
  3. Cracked or plugged DP sensor hoses
  4. Engine making excess soot
  5. Ash-loaded DPF needing cleaning

Checks & fixes (easiest first)

  1. Review regen history (frequency, completed vs. aborted)
  2. Check the exhaust temperature sensors and DOC light-off during a parked regen
  3. Inspect DP sensor tubes and hoses inside and out
  4. Have the DPF cleaned or weighed if ash-loaded

FAQ

What does SPN 3936 FMI 2 mean?

Aftertreatment 1 DPF System — data erratic, intermittent, or incorrect. The signal jumps around, drops in and out, or disagrees with other information the controller has.

Is SPN 3936 FMI 2 serious?

Often comes with escalating derates. Fix the cause and regenerate before the DPF overloads.

What should I check first for SPN 3936 FMI 2?

Review regen history (frequency, completed vs. aborted); Check the exhaust temperature sensors and DOC light-off during a parked regen; Inspect DP sensor tubes and hoses inside and out.